A quick solution to try for sticky valves after you have tried oiling them. Trumpet valve still sticking after being oiled. How to Oil Trumpet Valves / The Best Method for Oiling Valves.
The trumpet is creative musical instruments and contains many technical parts. Sometimes the players facing issues in trumpet due to prolonged usage and hard pressing. Moving parts cause the majority of trumpet have problems.
The moving parts of the trumpet are valves and slides. The mouthpiece can be exposed but will not play on it and movable. Thus, the horn valves are often a matter of players.
The valve often some problem in pressing due to sticky. When the valve moved ups and downs, they could stop it smoothly and become stuck at different levels. In fact, many horn players are looking for their valves stops in midways, just when they're going to be compressed.
If your horn valve becomes glue, it can break down the piston and cause the unwanted voice. Solving this problem is easy. Use a suitable valve oil on regular bases. If you play daily routine, it should be done once a week.
If you practice a lot of hours every day, your valve oil should be done twice a week or three times a week. Due to this your valve more smooth in pressing and safe from any harsh friction.
The Oiling the valve, not a critical task very easy and quick process. But if you are the student and no any experience in oiling then read out given tips for better and proper result.
- Firstly place the trumpet on flat location.
- The unscrew the valve and remove from the main body.
- While pushing back the valve from body dont apply any force.
- Do not pull it out completely one time; You should slowly in several steps.
- After doing this job Place several drops in the shaft. Be care fill oil not get in the holes.
- Push back in valve casting and pressing it much time.
- You feel that valve working correctly with smooth pressing.
Many kind of trumpet valve oil available on market with different quality. In this some are best for your valve piston smoothness and long life. But some are comes in bad quality that provides no any out put.
In below we draw table with each product cause of selection and also these valve oil selected after get outstanding testing result. Its provides your trumpet valve stuck less pressing and smoothness as well as durability.
One of the most efficient oil with quick acting and approach deep surface. That is long lasting and scientifically Blended. So keep you trumpet also cleaning internally.
If you need nontoxic, synthetic and pure ultra oil for piston or rotors. Its totally odorless and non-flammable liquidized. Long lasting efficient oil so you can use for long time.
That is ultra Pure REL valve oil comes in 8-Oz refilled bottle. Odorless and non toxic that easily approach deep/critical part of trumpet like piston, action valve and inlaid button.
The following products also describe with detailed for more batter guidance to trumpet users. More that these content provides you easy comparison among three selected valve oil bottles.
The best oil ever due amazing fact acting. Only few drops placed in casting tube valve as well as valve areas. Then pressing valve few time and finally your sticky valve working properly. Its a long lasting oil and no need to use regularly. Before apply you must clean inner areas of trumpet. This oil keep safe and clean internal areas of trumpet.
Features:
- Very efficient and little amount enough for sticky valve.
- Make your trumpet long lasting and provide better sound quality.
- Comes in transparent bottle in which easy judge quantity.
- Provides smoothness and cleaning movable parts.
- Little price range.
The Ultra-Pure Professional Valve Oil provides outstanding lubrication that makes piston or rotating valves and trombone slides more smoothly. It is non-toxic, synthetic oil that contains an extended vent and can be used without edibility of swelling or discoloration valves. Ultra-pure oil advanced players like Bobby Shew, Wynton Marsalis, Arturo Sandoval, Chris Botti, Alison Balsom and Kiku Collins. This product get in a 2-ounce bottle with a dropper applicator.
When you use Ultra-Pure Professional Valve Oil for the first time, we recommend that you remove the valves and lower valve caps for oil ventilation and scroll down on old oils. Or you can have your horn batsomeh and dry. Use a lot of oils first few times to avoid all the old oils and debris.
For normal re-oil, carefully pull out the piston cover and use three to five drops per wallet. Even if your vent is good, it is good to do it once a week, follow the metal and rinse the small particles that can lower your valve. If you're in a hurry, you can stand in the middle of the piston about half of the exit and oil. But all the way out is the best.
Features:
- That is pure oil and nontoxic.
- Synthetic so useful for old piston valve.
- Run this oil long lasting.
- Its make as odorless.
- Its Non-flammable oil.
( Check Price and more Detail )
Blue Juice Valve Oil 8 Oz:
The other best valve oil comes in stack-able shape for Safety and Storage. Made with high efficiency ingredient with water proof material. Carved based for better stability and low chance for losing liquidized from bottle. That made with refined petroleum product that's especially effective on sensitive musical instrument valves.
Features:
- Its anti-corrosion ingredient for extra protection of valve.
- Not extra thick oil so easy approach in smart holes.
- Enough quantity so usable for long time.
- Famous as blue juice for musical instrument.
- Very affordable price.
Usually occur problem after oiling:
- If you unable the air blow in trumpet after oiling: This is the result of blocking the valve due to wrongly adjusted. To solve this problem, remove the valves (one) and make sure the engraved number is directed to row and fixed properly.
- The valves are very sticky: This often happens because the oil is in the case require more for removing massive dryness. To solve this problem, obliterate the valve and use a clean cloth to remove it. Add more oil and put it back. You may need to clean the valve that you can do by the lower valve.
This is not a usually happen daily and create leakage easily, with new trumpets. Veins can be damaged, and the problem starts in leakage form when the device is regularly used. To reduce air leakage (at least temporarily) use heavyweight valve oil (e.g., even if you are going to need a valve work, which means that your horn is professionally repaired.
When you have a trumpet, one of the common problems you are bound to experience at one time or the other is sticky keys. The good news is that most of the common problems are easy to fix.
For a trumpet to work properly, its components much work together. However, sometimes the parts may encounter issues that can make them affect your play or even the functioning of other components.
Sticky keys is one of the common problems you may encounter with your trumpet. The moveable parts of the trumpet such as valves and slides need to be in good working order. These are the parts that are more likely to cause problems on your trumpet. The mouthpiece can be removed but it is not moveable, like other parts.
Read on for an overview of how to fix sticky keys on a trumpet as well as solve other common problems.
Sticky Valves
Sometimes, you trumpet valves may start being sticky. The valves are meant to move up and down smoothly to provide a good play. However, sometimes they may get stuck in certain places. For example, the valve key may get stuck midway when you press it or are just about to press it. Sticky keys make it difficult for you to play and ruin your sound.
You can fix the sticky valve issue on your trumpet by oiling the valves regularly. Use a good quality valve oil such as Blue Juice to lubricate the valves.
If you practice or play every day, you should oil the valves at least once a week. If you practice or play for long periods every day, you may have to oil the valves more regularly.
How to Oil Trumpet Valves
Oiling the trumpet valves is an easy process.
IMPORTANT: If you are a young player, seek assistance from your parent, a pro player or your instructor before starting to oil the valves. If your child is playing the trumpet, you should know how to oil the valves as well as carry out simple valve repair techniques.
Follow the steps below to oil the valves.
- Place the trumpet on a flat surface lying down
- Unscrew the first valve slide and pull it out slightly. Do not pull it out completely as it can fall down and get damaged. Moreover, when you pull out the valve completely, you could end up putting it back in the wrong way. Make sure you pull only one slide at a time to avoid mixing them up.
- Squeeze a few drops of oil on the shaft of the valve. Do not place the oil in the holes.
- Slide back the valve in carefully until you hear a clicking sound. F=’
- Tighten the valve cap
Below is an excellent video that shows how you should oil the trumpet.
Possible Problems that Can Happen After Oiling
After oiling the trumpet valves, the following problems may arise.
- The valves are too sticky
The valves usually become sticky if the oil has loosened some desire in the trumpet valve case. To fix the problem, pull the valve out and wipe it thoroughly with a clean cloth. You will then have to oil the valve again before re-inserting it. You may also want to remove the bottom valve cap to clean the valve casing.
- You cannot blow the trumpet
If you encounter this problem, chances are that you have placed the valves back in backwards. The solution to the problem is to simply pull the valve back out and ensure that the number engraving is pointing in the direction of the mouthpiece.
Missing Buttons
If you usually buy vintage trumpet models, some of the instruments you get may be missing the valve buttons. You can get new valve buttons online or at trumpet repair stores. Make sure you get the trumpet buttons replaced by a professional.
Stuffy Sound
Your trumpet may sound stuffy or airy due to a problem with the valves. To find and solve the problem, check the following:
- Inspect the valve for any worn down or missing spacers, felts, or corks
- Confirm that the water key is not leaking or broken. If the cork for the water key is worn down or leaking, the seal will not be secure and this can create an airy or stuffy sound. Also, check for missing or broken water key spring. Finally, ensure that the water key is not bent
- Confirm that the valves have been returned to their correct positions. The valves can be mixed up when you are cleaning the trumpet. Check their numbers; 1, 2, and 3 to know where they should go. Valve 1 should go to the valve casing that is closest to the mouthpiece, valve 2 to the center position, and valve 3 should be closest to the bell.
- Check that there is no air leakage dues to small holes caused by rust or broken welds.
- Check whether there is anything stuck in the trumpet. Pull the valves and slides out and pass a cleaning snake all through the tubing. You can buy cleaning snakes specifically for trumpet use.
Air Leakage
You won’t experience any issues when your trumpet is still new. However, after you have been using it for some time, the valves may get loose. When the valves get loose, air may start leaking out between them and the casing. The air leakage will affect the instrument’s response.
Air leakage is usually as a result of wear and tear of a trumpet that is used consistently.
If a valve is extremely loose, it can bind within its casing. One of the ways of reducing air leakage is by using a heavier valve oil. However, the best option is usually to have valve work done or get the valves replaced. These tasks should be done by a professional.
Check the video below for more trumpet repair tips: